6-5
IM DLM3054-03EN
Specifications
1
2
3
4
5
6
App
Index
Item
Specifications
Trigger type (A trigger)
Edge:
Triggers on the edge of a single trigger source
The source can be selected from CH1 to CH4,
1
LOGIC,
2
EXT and LINE.
The slope can be set to rise, fall, or both. (Slope cannot be selected for LINE.)
Edge OR:
Triggers when any of the edge trigger conditions of multiple trigger sources is
met
The sources can be selected from CH1 to CH4.
1
The slope can be set to rise, fall, or both.
Pattern:
Triggers on the edge of the clock channel signal when the parallel pattern
conditions of multiple trigger sources are met
If the clock channel is set to None, triggers are activated based on the parallel
pattern conditions.
The sources can be selected from CH1 to CH4
1
and LOGIC
2
for both edge and
parallel pattern conditions.
The slope can be set to rise, fall, or both.
The parallel pattern logic is AND or OR.
The condition is Enter, Exit, True, or False.
If the clock channel is set to None and the condition is True or False, you can
set a time condition.
The time condition can be set to More than, Less than, Inside, Outside, or
Timeout.
For details on the time settings, see “Pulse Width.”
Pulse Width:
Triggers on the pulse width of a single trigger source
The source can be selected from CH1 to CH4,
1
and LOGIC.
2
More than:
Triggers when the time length during which the condition
is met is longer than Time, and the condition changes to
not met
Time: 2 ns to 10 s, resolution: 2 ns
Less than:
Triggers when the time length during which the condition
is met is shorter than Time, and the condition changes to
not met
Time: 4 ns to 10 s, resolution: 2 ns
Inside:
Triggers when the time length during which the condition
is met is longer than Time1 but shorter than Time2 and
the condition changes to not met
Time1: 2 ns to (10 s-2 ns), resolution: 2 ns
Time2: 4 ns to 10 s, resolution: 2 ns
Minimum spacing between Time1 and Time2: 2 ns
Outside:
Triggers when the time length during which the condition
is met is shorter than Time1 or longer than Time2 and the
condition changes to not met
Time1: 2 ns to (10 s-2 ns), resolution: 2 ns
Time2: 4 ns to 10 s, resolution: 2 ns
Minimum spacing between Time1 and Time2: 2 ns
Timeout:
Triggers when the time length during which the condition
is met exceeds Time
Time: 4 ns to 10 s, resolution: 2 ns
Time accuracy:
3
CH1 to CH4: ±(0.002% + 450 ps)
LOGIC: ±(0.002% + 1 ns)
Minimum time
detection width:
1 ns (typical value
5
)
Rise/Fall Time:
Triggers on the rise time or fall time or both of a single trigger source
The source can be selected from CH1 to CH4.
1
Time condition can be set to More than, Less than, Inside, or Outside.
For details on the time settings, see “Pulse Width.”
Runt:
Triggers on the runt pulse of a single trigger source
The source can be selected from CH1 to CH4.
1
Based on two levels, upper level and lower level, triggers can be activated on
a positive runt pulse not greater than the upper level or a negative runt pulse
no less than the lower level or both.
Further, triggers can be activated on the runt pulse time described earlier.
The time condition can be set to None, More than, Less than, Inside, or
Outside.
For details on the time settings, see “Pulse Width.”
6.2 Triggering Section
