7-5
SM 701730-01E
Procedures for Disassembly
7
7
7.5
Removing the CPU Board Assy
1.
Remove the printer case. See section 7.4, “Removing the Printer Case.”
2.
Remove the screw from the left side panel as shown in the figure.
3.
Remove the screw from the right side panel as shown, then remove the
multiconductor(s) (there are two multiconductors with a PC card, and one with a
floppy disk drive).
4.
Pull out the CPU Board Assy in the direction of the arrow as shown in the figure
below, then remove the assy.
DL with the CPU Board Assy Removed
