3-2
IM CA700-02EN
Connecting to the Pressure Transmitter to the CA700
Connect the pressure pump output to the transmitter input and the CA700 input through branching.
Some pressure pumps have two output ports: one for applying pressure and another for the pressure
meter.
Connect the electrical output of the pressure transmitter to the signal terminal of the CA700. Connect
the H side of the pressure transmitter to the SOURCE mA/V terminal of the CA700 and the L side to
the MEASURE mA terminal.
You can also use the external pressure sensor to calibrate a high-pressure pressure transmitter. For
the connecting procedure, see section 2.4.
Pressure transmitter
Pressure pump
(91051/91056 etc.)
CA700
Input terminal
H
L
Red
Black
3.1 Connecting to the Pressure Transmitter
Summary of Contents for CA700
Page 14: ...xii...
