IM CA71-E
7-1
Functions Provided by DIP
Switch
1
2
3
4
5
6
7
8
9
10
11
12
13
App
7. Functions Provided by DIP Switch
By configuring the DIP switch, you can use the functions listed below.
The DIP switch can be found by removing the battery holder cover at
the back of the calibrator.
CAUTION
Turn off the calibrator before you change the DIP switch configuration.
French
ATTENTION
Désactiver l’étalonneur avant de modifier la configuration du commutateur DIP.
DIP Switch
Position
Description
Factory Setting
OFF
(left-side)
ON
(right-side)
1
Sweep
Selects the sweep or auto-step function.
2
Speed
Changes the speed setpoint of the sweep or
auto-step function.
3
INT RJ
Selects the internal reference junction
compensation for TC signal generation.
4
IPTS-68
Selects the IPTS-68 temperature scale for
temperature signal generation or measurement.
5
No use
Denotes the position is not used.
6
Temp
OFF
7
Contact In
Selects contact input based operation for pulse
measurement.
8
No use
Denotes the position is not used.
12345678
ON
DIP switch
