IM CA71-E
6-5
Memory Functions
1
2
3
4
5
6
7
8
9
10
11
12
13
App
NOTE
To stop overwriting the data, press the
key one time.
This cancels saving data, reverting to the original state of being able to
save/read data to/from memory.
TIP
To cancel the memory mode (saving/reading),
press the
key one more time.
(Executing the MEM SAVE function automatically cancels the memory mode.)
6.2 Reading Data from Memory
Step 1:
Press the
key once.
The LCD shows MEM No. xx.
At this point, the MEM No. indicator shows a memory number
immediately following the one most recently used to save
data. (Memory is ready for data saving.)
Step 2:
Pressing the
key causes the on-screen
READ
indication to blink, indicating the calibrator is reading from
memory.
Step 3:
Using the pair of
key, select the memory number
whose data you want to read.
The LCD shows the data thus read out of memory.
The items of the read data are shown on their respective
measured-value and generated-value display areas.
If the area with the memory number contains no saved data,
the LCD shows - - - - -.
TIP
• To cancel reading from the memory mode,
press the
key or the
key one more time.
• To save data anew while reading from memory, overwrite the existing
data by following step 2 in subsection 6.1.3, "Overwriting Data in Memory."
6.2 Reading Data from Memory
