6-2
IM CA71-E
6.1 Saving Data into Memory
6.1 Saving Data into Memory
6.1.1 Saving Data in the Order of Memory Numbers
Step 1:
Press the
key.
The
MEM No.
indicator on the LCD turns on.
At this point, the indicator shows a memory number
immediately following the one most recently used to
save data.
Step 2:
Pressing the
key saves the sourced and measured
(currently on-display) signal values at that moment into
the area with that memory number (address).
Executing the MEM SAVE function cancels the state of
selecting memory, reverting to normal setting mode.
Step 3:
To save the next data item into the area with the next
memory number, press the
key once again.
Now the MEM No. indicator shows a memory number one
count larger than the previous one.
Step 4:
Pressing the
key saves the sourced and measured
(currently on-display) signal values at that moment into
the area with that memory number (address) – the previous
memory number (address) + 1.
TIP
To cancel the memory mode (saving/reading),
press the
key one more time.
(Executing the MEM SAVE function automatically cancels the memory mode.)
