IM CA71-E
4-21
Source
1
2
3
4
5
6
7
8
9
10
11
12
13
App
Step 6:
Pressing the
key causes the
indicator on
the LCD to change from
to .
The calibrator sources a (main setpoint) × (
n/m
) signal
between the output terminals for each range selected.
Step 7:
To turn off the output, press the
key once again.
The
appears on the LCD and the output terminals are
open-circuited.
Step 8:
Pressing the
key one more time cancels the divided
output (
n/m
) mode.
TIP
To change the main setpoint, temporarily cancel the divided output
(
n/m
) mode.
Set the main setpoint once again.
Then, place the calibrator in the divided output (
n/m
) mode once again.
4.7 Sweep Function
The sweep function varies the output in a linear manner.
For further details, see Section 7.1, “Sweep Function.”
4.8 Auto Step Function
The auto step function varies the output in a step-by-step manner.
For further details, see Section 7.2, “Auto Step Function.”
4.7 Sweep Function
