YMGI, Engineered Comfort Products for A Sustainable and Efficient Green World!
YMGI: Your Modern Green Idea
78
Removal of compressor/gas liquid separator
NOTE:
Before removing the compressor/gas liquid separator, make sure there is
no refrigerant in the pipeline and power is cut off.
Step
Picture
Work instruction
5. Install the new compressor/gas
liquid separator onto the
chassis.
After replacing the compressor/gas
liquid separator, tighten up the
base screw nuts.
6. Connect the welding interfaces
of compressor/gas liquid
separator to the pipeline.
Weld the connection pipes of
compressor so as to connect them
to the compressor.
NOTE
: When replacing the
compressor, avoid touching the
nearby pipeline and components.
7. Connect the compressor wires.
Connect the compressor wires to
the wire terminals on the top of
compressor.
NOTE
: When connecting the wires,
be sure to match the colors with
the corresponding wire terminals.
