YMGI, Engineered Comfort Products for A Sustainable and Efficient Green World!
YMGI: Your Modern Green Idea
95
4. Install the new gas liquid
separator
Install the gas liquid separator by
referring to the positions of
entering and leaving pipes. Weld
the 2 welding interfaces.
Nitrogen welding: the pressure of
nitrogen is 0.5±0.1kgf/ cm
²
(relative pressure).
NOTE
: When welding the pipes,
do not let the flame burn the other
components.
Tighten the screws of gas liquid
separator.
5. Secure the electric box and
arrange the wires as required.
Put the electric box back in place
and tighten up the screws.
Arrange the wires as original.
6. Check and open the upper and
side panels.
Check whether each component
and connection wire is well
connected.
If everything is OK, install the
upper, left and right panels.
Tighten up the screws.
