YMGI, Engineered Comfort Products for A Sustainable and Efficient Green World!
YMGI: Your Modern Green Idea
67
Replacement of compressor
Step 1: Preparation
1) Prepare the components for replacement
When carrying the old and new compressors, do not place the compressors horizontally or upside down. The
angle of inclination should be within ±30°. Make sure the lubricant inside the compressors will not flow from the oil
balance mouth. The suction and exhaust openings of the compressors must be sealed. If a rubber seal is missing,
use adhesive tape to seal the opening. This is to prevent the compressor oil from contacting the air.
Before replacement, make sure the nameplates and models of the compressors are identical.
Make sure the lubricant is sealed inside the compressors.
