Using the OSICS ECL Module
118
OSICS User Manual
3.
Turn the rotary knob to put the cursor before
MAINFRAME
and press it to validate
your selection.
The ECL
Unit
Setup
menu is automatically displayed and the modulation is set to the
selected source.
Step 4 – Set the modulation control:
1.
Access the ECL
Unit Setup
Accessing an OSICS Module Setup
).
2.
Expand the
Modulation
menu and enter the
Control
sub-menu.
The
Modulation
control
sub-menu appears and displays the current state of the
modulation control.
Figure 83: ECL Unit Setup – Modulation Control (On)
3.
Turn the rotary knob to put the cursor before the wanted modulation:
•
ON
for standard modulation.
•
ON INVERTED
for reverse modulation
4.
Press the rotary knob to validate your selection.
Modulation is enabled. In the
System Status
screen, the letter
M
is displayed in the
channel
Info
field of the corresponding module.
5.
To stop the modulation: in the
Control
sub-menu, select
OFF
.
Main
EXIT
1
2
3
4
5
6
7
8
Unit Setup - Modulation control
ESCAPE
▲
Modulation control :
OFF
ON
Select a new value.
ON INVERTED
