![background image](http://html1.mh-extra.com/html/yealink/yealink-sip-t48g/yealink-sip-t48g_administrators-manual_908447051.webp)
Getting Started
39
2.
Select desired value from the pull-down list of Mode(IPv4/IPv6).
3.
Click Confirm to accept the change.
A dialog box pops up to prompt that settings will take effect after a reboot.
4.
Click OK to reboot the phone.
To configure a static IPv4 address via web user interface:
1.
Click on Network->Basic.
2.
In the IPv4 Config block, mark the Static IP Address radio box.
3.
Enter the desired values in the IP Address, Subnet Mask, Gateway, Primary DNS
and Secondary DNS fields.
4.
Click Confirm to accept the change.
A dialog box pops up to prompt that settings will take effect after a reboot.
5.
Click OK to reboot the phone.
Summary of Contents for Yealink SIP-T48G
