Yealink Yealink SIP-T48G, Administrator'S Manual, Page: 134 / 319

Microsoft Lync Edition Administrator’s Guide for SIP-T2_Series and T4_Series IP Phones
122
Parameters Permitted Values Default
Description:
Configures the ringer device for the IP phone.
0-Use Speaker
1-Use Headset
2-Use Headset & Speaker
If the ringer device is set to Headset or Headset&Speaker, the headset should be
connected to the IP phone and the headset mode also should be activated in
advance.
Web User Interface:
Features->Audio->Ringer Device for Headset
Phone User Interface:
None
To configure ringer device for headset via web user interface:
1. Click on Features->Audio.
2. Select the desired value from the pull-down list of Ringer Device for Headset.
3. Click Confirm to accept the change.
Auto answer allows IP phones to automatically answer an incoming call. IP phones will
not automatically answer the incoming call during a call even if auto answer is enabled.
Auto answer is configurable on a per-line basis. Auto-Answer delay defines a period of
delay time before the IP phone automatically answers incoming calls.