Yealink Yealink SIP-T48G Administrator'S Manual Download Page 252

Page: 252 / 319

Microsoft Lync Edition Administrator’s Guide for SIP-T2_Series and T4_Series IP Phones

240

To configure the level of the system log via web user interface:

Click on Settings->Configuration.

Select the desired level from the pull-down list of System Log Level.

Click Confirm to accept the change.

The system log level is set as 6, the informational level.

Note

To configure the phone to export the system log to a syslog server via web user
interface:

Click on Settings->Configuration.

Mark the Server radio box in the Export System Log field.

Enter the IP address or domain name of the syslog server in the Server Name field.

Click Confirm to accept the change.

Informational level may make some sensitive information accessible (e.g., password

dial number), we recommend that you reset the system log level to 3 after providing the
syslog file.

Summary of Contents for Yealink SIP-T48G
































































































































































































































































































































Search results

Summary of Contents for Yealink SIP-T48G

Reviews:

Yealink Yealink SIP-T48G, Administrator'S Manual, Page: 252 / 319

Search results

Summary of Contents for Yealink SIP-T48G

Reviews: