Yealink Yealink SIP-T48G Administrator'S Manual Download Page 128

Page: 128 / 319

Microsoft Lync Edition Administrator’s Guide for SIP-T2_Series and T4_Series IP Phones

116

Parameters

Permitted Values

Default

Description:

Enables or disables live dialpad feature.

0-Disabled

1-Enabled

If it is set to 1 (Enabled), the IP phone will automatically dial out the entered phone
number on the dialing screen without pressing a send key.

Web User Interface:

Settings->Preference->Live Dialpad

Phone User Interface:

None

phone_setting.inter_digit_time

Integer from 1 to

Description:

Configures the delay time (in seconds) for the IP phone to automatically dial out the
entered digits without pressing a send key.

Note: It works only if the value of the parameter “phone_setting.predial_autodial” is
set to 1 (Enabled).

Web User Interface:

Settings->Preference->Inter Digit Time(1~14s)

Phone User Interface:

None

To configure live dialpad via web user interface:

Click on Settings->Preference.

Select the desired value from the pull-down list of Live Dialpad.

Summary of Contents for Yealink SIP-T48G
































































































































































































































































































































Search results

Summary of Contents for Yealink SIP-T48G

Reviews:

Yealink Yealink SIP-T48G, Administrator'S Manual, Page: 128 / 319

Search results

Summary of Contents for Yealink SIP-T48G

Reviews: