Yealink Yealink SIP-T48G Administrator'S Manual Download Page 116

Page: 116 / 319

Microsoft Lync Edition Administrator’s Guide for SIP-T2_Series and T4_Series IP Phones

104

Parameters

Permitted Values

Default

Description:

Enables or disables the IP phone to not send any pound key when pressing double
#.

0-Disabled (Send one pound key by pressing double #)

1-Enabled (Do not send any pound key when pressing double #)

Note: It works only if the value of the parameter “features.key_as_send” is set to 1
(Enabled).

Web User Interface:

Features->General Information->Send Pound Key

Phone User Interface:

None

features.key_tone

0 or 1

Description:

Enables or disables the IP phone to play a key tone when a user presses any key on
your phone keypad.

0-Disabled

1-Enabled

If it is set to 1 (Enabled), the IP phone will play a key tone when a user presses any
key on your phone keypad.

Web User Interface:

Features->Audio->Key Tone

Phone User Interface:

None

features.send_key_tone

0 or 1

Description:

Enables or disables the IP phone to play a key tone when a user presses a send key.

0-Disabled

1-Enabled

If it is set to 1 (Enabled), the IP phone will play a key tone when a user presses a
send key.

Note: It works only if the value of the parameter “features.key_tone” is set to 1
(Enabled).

Web User Interface:

Summary of Contents for Yealink SIP-T48G
































































































































































































































































































































Search results

Summary of Contents for Yealink SIP-T48G

Reviews:

Yealink Yealink SIP-T48G, Administrator'S Manual, Page: 116 / 319

Search results

Summary of Contents for Yealink SIP-T48G

Reviews: