Yealink Yealink SIP-T42G, User Manual

Page: 110 / 142

User Guide for the SIP-T42G IP Phone
100
To configure a URL record key via phone user interface:
1. Press Menu->Features->DSS Keys.
2. Select the desired DSS key.
3. Press or , or the Switch soft key to select URL Record from the Type field.
4. (Optional.) Enter a string that will appear on the LCD screen in the Label field.
5. Enter the URL (e.g., http://10.1.2.224/phonerecording.cgi) in the Value field.
6. Press the Save soft key to accept the change or the Back soft key to cancel.
Record and URL Record keys are configurable via web user interface at the path
DSSKey->Line Key.
The Record and URL Record keys control the recording, and are available:

During an active call

When calls are on hold or mute

During a blind or attended transfer

During a conference call

When the phone prompts you to answer an incoming call
The Record and URL Record keys are not available when:

There are no connected calls on your phone

You place a new call
To record a call:
1. Press the Record or URL Record key during a call.
If the recording starts successfully, the recording icon will appear on the LCD screen
and the Record or URL Record key LED will flash green.
2. Press the Record or URL Record key again to stop recording.
The recording icon disappears from the LCD screen and the Record or URL Record
key LED goes out.
Recording status indications you need to know:
Circumstance Icons on the LCD screen
A recording is started appears on the LCD screen
A recording cannot be started appears for 1 second
A recording cannot be stopped appears for 1 second, then goes back