Yealink Yealink SIP-T42G Page 14 User Manual Download

Page: 14 / 142

User Guide for the SIP-T42G IP Phone

Icon

Description

Missed Calls

Received Calls

Placed Calls

Recording box is full

A call cannot be recorded

Recording starts successfully

Recording cannot be started

Recording cannot be stopped

Power Indicator LED

LED Status

Description

Solid red

The phone is initializing.

Fast flashing red (300ms)

The phone is ringing.

Slow flashing red (1s)

The phone receives a voice mail.

Off

The phone is powered off.
The phone is idle.
The phone is busy.
The call is placed on hold or is held.
The call is mute.

Line key LED

LED Status

Description

Solid green

The line is seized.
The line is in conversation.

Fast flashing green

The line receives an incoming call.

Slow flashing green

The call is placed on hold.

Off

The line is inactive.

Summary of Contents for Yealink SIP-T42G















































































































































Search results

Summary of Contents for Yealink SIP-T42G

Reviews:

Related manuals for Yealink SIP-T42G

Brands by name

Popular brands

Yealink Yealink SIP-T42G, User Manual

Search results

Summary of Contents for Yealink SIP-T42G

Reviews:

Related manuals for Yealink SIP-T42G

Brands by name

Popular brands