Yealink Yealink SIP-T42G User Manual Download

Page: 91 / 142

Basic Call Features

You can enable/disable call forward for the phone, or you can customize call forward for
each or all accounts. Two call forward modes:



Phone (default): Call forward is effective for the phone system.



Custom: Call forward can be configured for each or all accounts.

To configure the call forward mode via web user interface:

Click on Features->Forward & DND.

In the Forward block, mark the desired radio box in the Mode field.

Click Confirm to accept the change.

Note

To enable call forward in phone mode:

Press Menu->Features->Call Forward.

Press or to select the desired forwarding type, and then press the Enter
soft key.

Depending on your selection:

a.) If you select Always Forward:

1) Press or , or the Switch soft key to select Enable from the Always

Forward field.

Call forward mode is configurable via web user interface only.

Summary of Contents for Yealink SIP-T42G















































































































































Search results

Summary of Contents for Yealink SIP-T42G

Reviews:

Related manuals for Yealink SIP-T42G

Brands by name

Popular brands

Yealink Yealink SIP-T42G, User Manual

Search results

Summary of Contents for Yealink SIP-T42G

Reviews:

Related manuals for Yealink SIP-T42G

Brands by name

Popular brands