Yealink Yealink SIP-T42G, User Manual, Page: 72 / 142

User Guide for the SIP-T42G IP Phone
62
Delay Time for Dial-Now Rule
You can configure the interval for dial-now rules. That is, you can configure your phone
to dial out the phone number automatically, which matches a dial-now rule, after the
specified period of time.
To configure the delay time for dial-now rule via web user interface:
1. Click on Features->General Information.
2. Enter the time within 1-14 (in seconds) in the Time-Out for Dial-Now Rule field.
3. Click Confirm to accept the change.
Note
Area codes are also known as Numbering Plan Areas (NPAs). They usually indicate
geographical areas in a country. This feature is necessary only when dialing the number
outside the code area. For example, area code is configured as "Code: 011, Min Length:
4, Max Length: 11". When you dial out the number "56789" (the length of the number is
between 4 and 11), the phone will add the area code and dial out the number
"01156789".
To configure the area code and lengths via web user interface:
1. Click on Settings->Dial Plan->Area Code.
2. Enter the desired values in the Code, Min Length (1-15) and Max Length (1-15)
fields.
3. Enter the desired line ID in the Account field or leave it blank.
Delay time for dial-now rule
is configurable via web user interface only.