Yealink Yealink SIP-T42G User Manual Download

Page: 40 / 142

User Guide for the SIP-T42G IP Phone

To adjust the display order of enabled lists, select the desired list and click
or .

The LCD screen displays the list(s) in the adjusted order.

Click Confirm to accept the change.

Note

To check directory via phone user interface:

Press the Directory soft key when the phone is idle.

The LCD screen displays the enabled list(s) in the directory.

If there is only one list in the directory, press the Directory soft key to enter this list
directly.

Note

Directory is configurable via web user interface only.

If remote phone book and LDAP are not configured in advance, you cannot see remote
phone book and LDAP lists on the phone user interface. For more information on remote

phone book, refer to

Remote Phone

Book

on page

. For more information on the LDAP,

refer to

Yealink_SIP-T4X_IP_Phone_Family_Administrator_Guide.

Summary of Contents for Yealink SIP-T42G















































































































































Search results

Summary of Contents for Yealink SIP-T42G

Reviews:

Related manuals for Yealink SIP-T42G

Brands by name

Popular brands

Yealink Yealink SIP-T42G, User Manual

Search results

Summary of Contents for Yealink SIP-T42G

Reviews:

Related manuals for Yealink SIP-T42G

Brands by name

Popular brands