Yealink VC400, Administrator'S Manual

Page: 207 / 299

Configuring System Settings
191
Parameter Description Configuration Method
Contrast
Configures the contrast of the
camera.
Valid Values:
0-100
Default:
For VCC18 camera, the default value
is 45.
For VCC20 camera, the default value
is 7.
Remote Control
Web User Interface
Noise Reduction
(2D)
Specifies the noise reduction (2D)
mode.

Off

Low

Middle

High
Default:
Middle
Remote Control
Web User Interface
Noise Reduction
(3D)
Specifies the noise reduction (3D)
mode of VCC18 camera.

Off

Low

Middle

High
Default:
Off
Note:
It is not applicable to VCC20
camera.
Remote Control
Web User Interface
Hangup Mode
Enables or disables the camera to
flip the image view when camera is
handed at up-side-down position
Default:
Off
Remote Control
Web User Interface
Camera Pan
Direction
Configures the pan direction of the
camera.

Normal

Reversed
Default:
Normal
If the camera reversed mode is
enabled, the camera pan direction
Remote Control
Web User Interface