Yealink VC400, Administrator'S Manual

Page: 138 / 299

Administrator’s Guide for Yealink Video Conferencing Systems
122
Configuring SIP Settings
Yealink VC400/VC120 video conferencing system support Session Initiation Protocol (SIP). If
your server supports SIP, you can use SIP to establish calls.
SIP Account
To establish calls using SIP, you can configure a SIP account for the system.
SIP account parameters on the system are described below:
Parameter Description Configuration Method
SIP Account
Enables or disables the SIP account.
Default:
Enabled
Remote Control
Web User Interface
Register Name
Configures the user name of the SIP
account for register authentication.
Default
: Blank
Remote Control
Web User Interface
User Name
Specifies the user name to use for
authentication when registering with
a SIP server.
Default
: Blank
Remote Control
Web User Interface
Password
Specifies the password associated
with the user name used to
authenticate the system to the SIP
server.
Default
: Blank
Remote Control
Web User Interface
Server/Server
Host
Configures the IP address or domain
name of the SIP server for the SIP
account.
Default
: Blank
Remote Control
Web User Interface
SIP Server
Port/Port
Configures the port of the SIP server.
Valid values:
Integer from 0 to
65535.
Default
: 5060
Web User Interface
Outbound/Enable
Outbound Proxy
Server
Enables or disables the system to
send requests of the SIP account to
the outbound proxy server.
Default:
Disabled
Remote Control
Web User Interface
Outbound
Configures the IP address or domain
Remote Control