Yealink VC400, Administrator'S Manual

Page: 198 / 299

Administrator’s Guide for Yealink Video Conferencing Systems
182
Parameter Description Configuration Method
1500
Default:
1500
Note
: If you change this parameter,
the system will reboot to make the
change take effect.
To configure MTU via web user interface:
1.
Click on
Network
->
Advanced
.
2.
In the
MTU
block, enter the desired value in the
Video MTU
field.
3.
Click
Confirm
to accept the change.
A dialog box pops up to prompt that the settings will take effect after a reboot.
4.
Click
Confirm
to reboot the system immediately.
To configure MTU via the remote control:
1.
Select
Menu
->
Advanced
(default password: 0000) ->
Advanced Network
.
2.
Enter the desired value in the
Video MTU(1000-1500)
field.
3.
Press the
Save
soft key to accept the change.
The display device prompts “Reboot now?”.
4.
Select
OK
to reboot the system immediately.