Yealink VC400, Administrator'S Manual

Page: 81 / 299

Configuring Network
65
3.
Enter the desired time interval in the
Packet Interval (1-3600s)
field.
4.
Click
Confirm
to accept the change.
A dialog box pops up to prompt that the settings will take effect after a reboot.
5.
Click
Confirm
to reboot the system immediately.
To configure LLDP via the remote control:
1.
Select
Menu
->
Advanced
(default password: 0000) ->
Advanced Network
.
2.
In the
LLDP
block, check the
Active
checkbox.
3.
Enter the desired value in the
Packet Interval (1-3600s)
field.
4.
Press the
Save
soft key to accept the change.
The display device prompts “Reboot now?”.
5.
Select
OK
to reboot the system immediately.
Manual Configuration for VLAN
VLAN is disabled on systems by default. You can configure VLAN manually. Before configuring
VLAN on the systems, you need to obtain the VLAN ID from your network administrator.
Parameters of manual VLAN on the system are described below.
Parameter Description Configuration Method
Internet
Port
->
Active
Enables or disables VLAN for the
Internet (WAN) port.
Default:
Disabled
Note
: If you change this parameter,
the system will reboot to make the
Remote Control
Web User Interface