Yealink VC400, Administrator'S Manual

Page: 185 / 299

Configuring System Settings
169
Parameter Description Configuration Method
Default:
Off
Passward
Configures the meeting password.
Default:
blank
Remote Control
Web User Interface
To configure the meeting password via web user interface:
1.
Click on
Setting-
>
General
.
2.
Select the desired value from the
Meeting Password
pull-down list.
3.
Enter the desired value in the
Password
field.
4.
Click
Confirm
to accept the change.
To configure the meeting password via the remote control:
1.
Select
Menu
->
Basic-
>
Meeting Password
.
2.
Check the
Meeting Password
checkbox.
3.
Enter the meeting password in the
Password
field.
4.
Press the
Save
soft key to accept the change.
People can press
IP##meeting password
or
meeting password@IP
to dial your system or join
your conference call. For example: your IP address is 10.3.6.201 and you set 123 as your meeting
password. People should press
10.3.6.201##123
or
123@10.3.6.201
to dial your system or join
your conference call. If people call you without a meeting password or with a wrong meeting
password, the call will fail.
Meeting Whitelist
VC400 supports meeting whitelist feature. If an 8-way conference license is imported to your
VC120, your VC120 will support meeting whitelist feature.