Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
353
Attributes
Description
Note: This is not applicable to T19(P) E2 phones.
Customizing the Dial Now File
1. Open the dial now file.
2. To add a dial-now rule, add <Data DialNowRule="" LineID="" / > to the file. Each starts on a new line.
3. Specify the values within double quotes.
For example,
<Data DialNowRule="1001" LineID="0" / >
4. Save the changes and place this file to the provisioning server.
Replace Rule Configuration
You can configure replace rules either one by one or in batch using a replace rule template.
The following table lists the parameters you can use to configure the replace rule.
Parameter dialplan.replace.prefix.X
[1]
<y0000000000xx>.cfg
Description
It configures the entered number to be replaced.
Note: It works only if “dialplan.digitmap.enable” and “account.X.dialplan.digitmap.enable” are set to 0
(Disabled).
Permitted
Values
String within 32 characters
Default
Blank
Web UI
Settings > Dial Plan > Replace Rule > Prefix
Parameter dialplan.replace.replace.X
[1]
<y0000000000xx>.cfg
Description
It configures the alternate number to replace the entered number.
The entered number is configured by "dialplan.replace.prefix.X".
Note: It works only if “dialplan.digitmap.enable” and “account.X.dialplan.digitmap.enable” are set to 0
(Disabled).
Permitted
Values
String within 32 characters
Default
Blank
Web UI
Settings > Dial Plan > Replace Rule > Replace
Parameter dialplan.replace.line_id.X
[1]
<y0000000000xx>.cfg
Description
It configures the desired line to apply the replace rule. The digit 0 stands for all lines. If it is left blank,
the replace rule will apply to all lines on the phone.
Multiple line IDs are separated by commas.
Note: It works only if “dialplan.digitmap.enable” and “account.X.dialplan.digitmap.enable” are set to 0
(Disabled).
Permitted
Values
0 to 16 (for T57W/T54W/T48U/T48S/T48G/T46U/T46S/T46G/T29G)
0 to 12 (for T53W/T53/T43U/T42U/T42S/T42G)
0 to 6 (for T41P/T41S/T27G)
0 to 3 (for T40P/T40G/T23P/T23G)
