Yealink One Talk W78B User Manual Download Page 43 | Manualshive

Page: 43 / 47

background image

User guide

43

Results

All individual settings of the base station will be reset to factory defaults. The power LED indicator and network LED indicator on the base station
slowly flash in sequence during the resetting. LEDs on the base station glow green after startup.

Important: Base station reset may take a few minutes. Do not power off until the base station starts up successfully.

Restarting the handset

You can restart the handset according to your needs.

Procedure

1.

Go to Menu > Settings > Advanced Settings (default PIN: 0000) > Reboot Config > Handset Reboot

2.

Tap OK
A message prompts whether to reboot the handset

Resetting the handset

You can reset individual settings that you have configured on the handset.
Except the settings of directory, call history, voice mail, and the handset registration, the handset will reset all customized settings to factory after
the resetting.

Procedure

1.

Go to OK > Settings > System Settings > Handset Reset
The phone prompts you whether to reset the handset

2.

Confirm the action

«
...
41
42
43
44
45
...
»

Summary of Contents for One Talk W78B
















































Reviews:

No comments

Related manuals for One Talk W78B

Brand: TANDBERG Pages: 3

OFFICESERV 100 Series

Brand: Samsung Pages: 22

Brand: UMX Pages: 22

Brand: Yealink Pages: 4

Brand: M4 Pages: 13

Brand: Salora Pages: 33

Brand: Sonim Pages: 89

Brand: Fairphone Pages: 36

Brand: Huawei Pages: 88

Brand: Polycom Pages: 12

Brand: Samsung Pages: 2

Brand: Samsung Pages: 68

Brand: Samsung Pages: 82

Brand: Samsung Pages: 104

Brand: Samsung Pages: 105

Brand: Samsung Pages: 156

Brand: Samsung Pages: 167

Brand: Sony Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands