Yealink One Talk W78B User Manual Download Page 39

Page: 39 / 47

User guide

Go to OK > Settings > System Settings > Eco Mode

Select Change

Audio settings

You can change the basic audio settings on your phone.

Silent mode

You can enable the silent mode if you do not want to be disturbed. The handset will not ring when receiving an incoming call, but it will still display
the incoming call information.

Switching on silent mode

You can silence an incoming call by switching on silence mode to stop your phone from ringing.

Procedure

Long press the * key until the phone prompts “All Ring

Tones

Off”

The silent icon

appears in the status bar

Switching off silent mode

If you want to resume the incoming ring, you can switch off silent mode.

Procedure

Long press the * key until the phone prompts “All Ring

Tones

On”

The silent icon

disappears from the status bar

Adjusting the volume

You can adjust the volume of the ringer, media, and audio during a call.

Procedure

Do one of the following:

•

Press the Volume key

•

Press the left or right navigation key when the handset is idle

•

Go to OK > Settings > Audio > Ring Tones > Volume and press the left or right navigation key.

Setting the ring tone

Ring tones are used to indicate the incoming calls.

Setting the ring tone for the internal calls

You can select a unique ring tone for the internal calls, so that you can identify callers when the phone rings.

Summary of Contents for One Talk W78B
















































Search results

Summary of Contents for One Talk W78B

Reviews:

Related manuals for One Talk W78B

Brands by name

Popular brands

Yealink One Talk W78B, User Manual

Search results

Summary of Contents for One Talk W78B

Reviews:

Related manuals for One Talk W78B

Brands by name

Popular brands