Yealink CP920 Administrator'S Manual Download Page 285

Page: 285 / 578

Administrator’s Guide for SIP-T2 /T3 /T4 /T5 /CP920 IP Phones

281

Description

It configures the location on the phone screen for soft key X.

Note

: It works only if “features.enhanced_dss_keys.enable” and “softkey.X.enable” are set to 1

(Enabled).

Permitted
Values

Integer from 0 to 10

If it is set to 0, the soft key X is located in the first available position from the left.

If it is set to other values, a

More

soft key appears and the soft key X is located in the specified pos-

ition. The following soft keys are moved by one position to the right. Press the

More

soft key to view

the remaining soft keys.

Default

Parameter

softkey.X.action

[1]

<y0000000000xx>.cfg

Description

It configures the action or function for custom soft key X.

This value uses the same macro action string syntax as an Enhanced DSS key.

You can also invoke the EDK macro that was already defined. The macro name follows the character
“!”.

Example

softkey.1.action = !macro1

In this example, macro1 stands for the macro name configured by the parameter “edk.edk-
list.X.mname”.

Note

: It works only if “features.enhanced_dss_keys.enable” and “softkey.X.enable” are set to 1

(Enabled).

Permitted
Values

String

Default

Blank

Parameter

softkey.X.softkey_id

[1]

<y0000000000xx>.cfg

Description

It configures the softkey id for custom soft key X.

Example

softkey.1.softkey_id = custom_macro1

Note

: It works only if “features.enhanced_dss_keys.enable” and “softkey.X.enable” are set to 1

(Enabled).

Permitted
Values

String

Default

Blank

Parameter

softkey.X.use.idle

[1]

<y0000000000xx>.cfg

Description

It enables or disables the custom soft key X to be displayed in the idle state.

Note

: It works only if “features.enhanced_dss_keys.enable” and “softkey.X.enable” are set to 1

(Enabled).

Permitted
Values

-Disabled

-Enabled

Default

Parameter

softkey.X.use.incoming_call

[1]

<y0000000000xx>.cfg

Description

It enables or disables the custom soft key X to be displayed in the alerting (ringing) state.

Summary of Contents for CP920



































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CP920

Reviews:

Related manuals for CP920

Brands by name

Popular brands

Yealink CP920, Administrator'S Manual

Search results

Summary of Contents for CP920

Reviews:

Related manuals for CP920

Brands by name

Popular brands