Administrator’s Guide for SIP-T2 /T3 /T4 /T5 /CP920 IP Phones
431
Topics
Call Completion Configuration
Example: Using Call Completion
Call Completion Configuration
The following table lists the parameters you can use to configure the call completion feature.
Parameter
features.call_completion_enable
<y0000000000xx>.cfg
Description
It enables or disables the call completion feature.
Permitted
Values
0
-Disabled
1
-Enabled
Default
0
Web UI
Features > General Information > Call Completion
Phone UI
Color Screen Phones:
Menu > Features > Others > Call Completion > Call Completion
Black-and-white Screen Phones:
Menu > Features > Call Completion > Call Completion
Example: Using Call Completion
The following example shows the configuration for call completion.
Example
features.call_completion_enable = 1
After provisioning, when you place a call and the callee is temporarily unavailable to answer the call, the phone
screen will prompt whether to wait for the callee party. You can activate the call completion feature. After the called
party becomes idle, the phone screen will prompt whether to dial the number.
Call Park and Retrieve
Call park allows users to park a call on a special extension and then retrieve it from another phone (for example, a
phone in another office or conference room).
The phones support call park feature under the following modes:
l
FAC mode
: parks the call to the local extension or the desired extension through dialing the park code.
l
Transfer mode
: parks the call to the shared parking lot through performing a blind transfer. For some servers,
the system will return a specific call park retrieve number (park retrieve code) from which the call can be
retrieved after parking successfully.
Topics
Call Park and Retrieve Configuration
Example: Setting Call Park and Retrieve in FAC Mode
Example: Setting Call Park and Retrieve in Transfer Mode
Call Park and Retrieve Configuration
The following table lists the parameters you can use to configure the call park and retrieve.
Parameter
features.call_park.park_mode
<y0000000000xx>.cfg