YATO YT-85915, Instructions Manual

Page: 13 / 92

13
O R I G I N A L I N S T R U C T I O N S
EN
PRODUCT OVERVIEW
The pressure washer is a device designed for cleaning various materials: stone, wood, metal and plastics, using a high-pressure
water jet. The washer may only be used outdoors and must not be used indoors. The correct, reliable and safe operation of the
device depends on its proper use, therefore:
Read and keep the entire manual before the fi rst use of the device.
The supplier shall not be liable for any damage resulting from failure to comply the safety instructions and recommendations
speci fi ed in this manual.
ACCESSORIES
The product is delivered complete but requires assembly before operation. The set does not include a hose for connecting the
washer to the water source.
SPECIFICATION
Parameter Units Value
Catalogue No. YT-85915
Rated voltage [V~] 220 - 240
Rated frequency [Hz] 50
Rated power [W] 2000
Max. water pressure [MPa] 15
Rated water pressure [MPa] 10
Water consumption [l/min.] 6
Max. lance pressure [MPa] 20
Max. lance capacity [l/min.] 10
Max. lance water temperature [ o C] 60
Max. hose pressure [MPa] 16
Max. hose water temperature [ o C] 60
Feed water pressure (min. – max.) [MPa] 0,15 - 0,30
Max. feed water temperature [
o
C] 50
Max. nozzle recoil [N] 14,83
Ingress protection rating IPX5
Noise level - sound pressure L
pA
± K [dB] (A) 85,8
Noise level - power L
wA
± K [dB] (A) 95,39
Vibration level [m/s
2
] 2,64
Protection class II
Weight [kg] 8,2
SAFETY INSTRUCTIONS
Caution! Read all of the following instructions. Failure to do so may result in electric shock, fi re, or personal injury.
FOLLOW THE INSTRUCTIONS BELOW
Intended use
This product consists of a water pump and an electric drive. The lance is connected to the water pump via a hose. The water jet
from the lance removes stubborn dirt with high water pressure and with the possible addition of cleaning agents. The water used
to feed the machine must be clean and free of any mechanical or chemical impurities.
High pressure generates a high velocity water jet at the outlet of the cleaning nozzle or spray head. As a result, even the most
stubborn dirt or paint layers can be removed. The washer can be used to clean
terrace slabs, pavements, façades and vehicles.
The water fl ow at the outlet of the nozzle is very sharp, so there is an increased risk of accidents and damage to the cleaned surface.
The device may only be used at temperatures above 0 O C.
Improper use
The pressure washer must not be used for the following purposes: spraying hot water (above 50
O
C); cleaning electrical equip-
ment; as a pump; spraying fl ammable liquids; spraying liquids other than water. Do not use the device to spray sea water.