5.5 Synchronizing with TSYNC
5-9
Operation
Explanation
1
Move the cursor to the line just
above the line where TSYNC
instruction is to be registered.
2
Press [INFORM LIST].
The instruction list appears.
3
Select “TSYNC.”
A TSYNC instruction is displayed in the input buffer line.
4
Change additional items.
<To register items as displayed in the input buffer line>
Proceed to Operation 5.
<To change the numerical data>
Move the cursor to the numerical data. Press [SHIFT] and the
cursor key simultaneously to increment or decrement the number.
To enter a number by pressing the Numeric keys, press
[SELECT] to display the input line.
Enter a number and press [ENTER], then the number in the input
buffer line is changed.
After having changed the numerical data, press [ENTER]. The
DETAIL EDIT window is closed and the JOB CONTENT window
reappears.
IN/OUT
CONTROL
DEVICE
MOTION
ARITH
SHIFT
OTHER
SAME
PRIOR
JUMP
CALL
TIMER
LABEL
COMMENT
RET
PSTART
TSYNC
PWAIT
TSYNC
1
TSYNC
2
TSYNC
Synchronization_no.=
118/210
