manualshive.com logo in svg

YASKAWA GA800 Series, Maintenance & Troubleshooting

The YASKAWA GA800 Series user manual provides detailed instructions for maintenance and troubleshooting of this high-performance product. Download the manual for free from manualshive.com to ensure optimal functionality and longevity of your equipment. Gain access to essential information and guidance for effective operation of the GA800 Series.

Share
Download
background image

4

YASKAWA

TOEPYAIGA8001B GA800 Drive Maintenance & Troubleshooting

2.2

Types of Faults, Minor Faults, Alarms, and Errors . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76

2.3

List of Fault, Minor Fault, Alarm, and Error Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77

2.4

Fault . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83

2.5

Minor Faults/Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113

2.6

Parameter Setting Errors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124

2.7

Auto-Tuning Errors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130

2.8

Backup Function Operating Mode Display and Errors . . . . . . . . . . . . . . . . . . . . . . . . 135

2.9

Diagnosing and Resetting Faults . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137

Fault and Power Loss Occur at the Same Time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137
Fault Occurs Without Power Loss. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137
Fault Reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137

2.10

Troubleshooting Without Fault Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139

Typical Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139
The Parameter Settings Will Not Change. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139
The Motor Does Not Rotate After Entering Run Command . . . . . . . . . . . . . . . . . . . . . . . . . . 140
The Motor Rotates in the Opposite Direction from the Run Command . . . . . . . . . . . . . . . . . 141
The Motor Rotates in Only One Direction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141
The Motor Is Too Hot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141
The Correct Auto-Tuning Mode Is Not Available . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142
The Motor Stalls during Acceleration or Accel/Decel Time Is Too Long . . . . . . . . . . . . . . . . . 142
The Drive Frequency Reference Is Different than the Controller Frequency Reference
Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143
The Motor Speed Is Not Stable When Using a PM Motor . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143
There Is Too Much Motor Oscillation and the Rotation Is Irregular . . . . . . . . . . . . . . . . . . . . . 143
Deceleration Takes Longer Than Expected When Dynamic Braking Is Enabled . . . . . . . . . 143
There Is Audible Noise from the Drive or Motor Cables when You Energize the Drive . . . . . 144
The Ground Fault Circuit Interrupter (GFCI) Trips During Run . . . . . . . . . . . . . . . . . . . . . . . . 144
Motor Rotation Causes Unexpected Audible Noise from Connected Machinery . . . . . . . . . 144
Motor Rotation Causes Oscillation or Hunting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145
PID Output Fault. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145
The Starting Torque Is Not Sufficient . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145
The Motor Rotates after the Drive Output Is Shut Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145
The Output Frequency Is Lower Than the Frequency Reference. . . . . . . . . . . . . . . . . . . . . . 145
The Motor Is Making an Audible Noise . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146
The Motor Will Not Restart after a Loss of Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146

3. Parameter List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147

3.1

Section Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148

3.2

How to Read the Parameter List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149

Icons and Terms that Identify Parameters and Control Methods . . . . . . . . . . . . . . . . . . . . . . 149

3.3

Parameter Groups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150

3.4

A: Initialization Parameters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152

A1: Initialization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152
A2: User Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153

3.5

b: Application. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156

b1: Operation Mode Selection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156
b2: DC Injection Braking and Short Circuit Braking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157
b3: Speed Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 158
b4: Timer Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160
b5: PID control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 161
b6: Dwell Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164
b7: Droop Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165

Summary of Contents for GA800 Series























































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for GA800 Series

ABB ACQ580-31 Series Quick Installation And Start-Up Manual preview
ACQ580-31 Series
Brand: ABB Pages: 15
ABB ACH580 Series Installation, Operation And Maintenance Manual preview
ACH580 Series
Brand: ABB Pages: 156
ABB ACH580 Series How To Set Up preview
ACH580 Series
Brand: ABB Pages: 2
ABB ACS580-01 drives Installation Manual preview
ACS580-01 drives
Brand: ABB Pages: 30
ABB ACS580-01 drives Installation Supplement Manual preview
ACS580-01 drives
Brand: ABB Pages: 264
ABB ACS880 Series Application Manual preview
ACS880 Series
Brand: ABB Pages: 44
ABB ACS880-01 Series Application Manual preview
ACS880-01 Series
Brand: ABB Pages: 46
Parker 650 Series Easy Start Manual preview
650 Series
Brand: Parker Pages: 17
Parker 650 Series Safety Booklet & Quickstart preview
650 Series
Brand: Parker Pages: 34
Samsung TS-H542A Manual preview
TS-H542A
Brand: Samsung Pages: 24
Samsung Super-writemaster SH-S203N User Manual preview
Super-writemaster SH-S203N
Brand: Samsung Pages: 2
Samsung SH-W162L Manual preview
SH-W162L
Brand: Samsung Pages: 32
Samsung SH-M522C - CD-RW / DVD-ROM Combo Drive User Manual preview
SH-M522C - CD-RW / DVD-ROM Combo Drive
Brand: Samsung Pages: 27
Samsung SE-S084B - DVD RW / DVD-RAM Drive User Manual preview
SE-S084B - DVD RW / DVD-RAM Drive
Brand: Samsung Pages: 2
Samsung SD-816B Manual Del Usuario preview
SD-816B
Brand: Samsung Pages: 19
Samsung SD-616Q User Manual preview
SD-616Q
Brand: Samsung Pages: 2
S&P VFTM 320 IP20 Instruction Manual preview
VFTM 320 IP20
Brand: S&P Pages: 68
GRASS SENSOMATIC Assembly And Operating Instructions Manual preview
SENSOMATIC
Brand: GRASS Pages: 19

Brands by name

Popular brands

Load more brands