YASKAWA GA800 Series, Maintenance & Troubleshooting, Page: 461 / 566

Startup
Procedure
and
T
est
Run
6
6.6 Keypad Operation
YASKAWA TOEPYAIGA8001B GA800 Drive Maintenance & Troubleshooting 461
4.
Push or to select [Trend Plot], then push .
The screen will show the monitors as shown in this figure.
Note:
Push [Hold] to switch between Pause and Restart for the monitor display. The
“
Hold (ENTER)
”
message flashes while you pause
monitoring.
◆
Change Parameter Setting Values
This example shows how to change the setting value for C1-01 [Acceleration Time 1] . Do the steps in this procedure
to set parameters for the application.
1.
Push (Home) to show the HOME screen.
Note:
• When the drive is in HOME Mode, the screen shows [Home] in the upper right-hand corner of the screen.
• If [Home] is not shown above the , push (Back).
2.
Push (Menu).
3.
Push or to select [Parameters], then push .
4.
Push or to select [C Tuning], then push .