v
■
Indication of Reverse Signals
In this manual, the names of reverse signals (ones that are valid when low) are written with a forward slash (/)
before the signal name, as shown in the following example:
• S-ON
=
/S-ON
• P-CON
=
/P-CON
■
Related Manuals
Refer to the following manuals as required.
Manual Name
Manual Number
Contents
Σ
-II Series SGM
H/SGDH
Digital Operator Operation Manual
TOE-S800-34
Provides detailed information on the operating method
of JUSP-OP02A-2 type Digital Operator (option
device).
Σ
-II Series SERVOPACKs
Personal Computer Monitoring Software
Operation Manual
SIE-S800-35
Describes the using and the operating methods on soft-
ware that changes the local personal computer into the
monitor equipment for the
Σ
-II Series servomotor.
Σ
-II Series SGDH
Fully Closed Interface Unit
User’s Manual
Type: JUSP-FC100
SIE-C718-5
Provides detailed information on the fully closed con-
trol of the JUSP-FC100 interface unit.
Σ
-II Series SGDH MECHATROLINK
Application Module User’s Manual
Type: JUSP-NS100
SIE-C718-4
Provides detailed information on MECHATROLINK
communications.
Σ
-II Series SGDH MECHATROLINK-II
Application Module User’s Manual
Type: JUSP-NS115
SIEPC71080001
Provides detailed information on MECHATROLINK-II
communications.
Σ
-II Series SGDH
DeviceNet Application Module
User’s Manual
Type: JUSP-NS300
SIE-C718-6
Provides detailed information on DeviceNet communi-
cations.
Σ
-II Series SGDH PROFIBUS-DP
Application Module User’s Manual
Type: JUSP-NS500
SIE-C718-8
Provides detailed information on PROFIBUS-DP
communications.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
