5 Installation Procedure
YASKAWA ELECTRIC
SIEP C730600 58A 1000-Series Option SI-EN3 Technical Manual
EN 15
Connection Diagram
Figure 8 Wiring Diagram
7.
Replace and secure the front covers of the drive (C, F) and replace the digital operator (D).
Figure 8
Figure 9 Replace the Front Covers and Digital Operator
Note:
Take proper precautions when wiring the option so that the front covers will easily fit back onto the drive. Make sure no cables
are pinched between the front covers and the drive when replacing the covers.
8.
Set drive parameters in
for proper option performance.
EDS Files
For easy network implementation of drives equipped with the option, an EDS file can be obtained from:
U.S.: http://www.yaskawa.com
Europe: http://www.yaskawa.eu.com
Japan: http://www.e-mechatronics.com
Other areas: Contact a Yaskawa representative.
Note:
Download the EDS file for SI-EN3 option. The SI-EN3 will not function as a slave in the network without the appropriate EDS
file.
<1> The ground wire provided in the option shipping package must be connected during installation.
Drive
M
U
V
W
R
S
T
CN5
FE
<1>
EtherNet/IP Master EtherNet/IP Cable
Motor
Power
SI-EN3
EtherNet/IP
Option
CN1
A1000
MS
F
C
D
A1000
