YASKAWA 1000-Series, Technical Manual

Page: 11 / 58

5 Installation Procedure
YASKAWA ELECTRIC SIEP C730600 58A 1000-Series Option SI-EN3 Technical Manual EN 11

Prior to Installing the Option
Prior to installing the option, wire the drive, make necessary connections to the drive terminals, and verify that the drive
functions normally without the option installed. Refer to the Quick Start Guide packaged with the drive for information
on wiring and connecting the drive.
Figure 2 shows an exploded view of the drive with the option and related components for reference.
Figure 2
Figure 2 Drive Components with Option
Properly connect all pins and connectors.
Failure to comply may prevent proper operation and possibly damage equipment.
Check wiring to ensure that all connections are correct after installing the option and connecting any other
devices.
Failure to comply may result in damage to the option.
A – Insertion point for CN5 connector H – Included screws
B – SI-EN3 option I – Ground wire
C – Drive front cover J – Option modular connector CN1
D – Digital operator K – Drive grounding terminal (FE)
E – LED label L – Connector CN5-A
F – Drive terminal cover M – Connector CN5-B
G – Removable tabs for wire routing N – Connector CN5-C
NOTICE
F
H
L
M
N
K
I
B
C
D
E
A
G
J
NS MS
A1000