STARTER MOTOR
TNV IDI Service Manual
10-19
Starter Motor
5. Install a switch
(Figure 10-37, (6))
in a circuit
between the battery positive (+) terminal
(Figure 10-37, (2))
and the starter solenoid
switch terminal
(Figure 10-37, (8))
on the
starter motor.
6. Use a suitable tachometer to monitor the rpm of
the starter.
7. Turn the switch to the ON position to energize
the solenoid and operate the starter. Monitor
the rpm, amperage draw and voltage. For test
specifications, see
for the appropriate starter motor.
Installation of Starter Motor
1. Reinstall the starter motor to the flywheel
housing.
2. Reinstall the starter mounting bolts
(Figure 10-38, (1))
. Tighten the bolts to
specification.
Standard Bolts and Nuts on page 4-26.
Figure 10-38
3. Reconnect the electrical wires to the solenoid
switch assembly. Be sure to place the cover
over the battery positive (+) cable connection.
4. Reconnect the battery, negative (-) cable last.
(1)
0002126
TNV_IDI_ServiceManual_A4.book 19 ページ ２０１２年２月２４日 金曜日 午前１０時２４分
