ENGINE
6-50
TNV IDI Service Manual
Cylinder Block
Figure 6-76
Inspection of Camshaft
1. Use V-blocks and a dial indicator to check
camshaft bend
(Figure 6-77)
. Place the
indicator on the center bearing journal.
Figure 6-77
2. Rotate the camshaft and observe the runout.
Record the measurements.
page 6-6 for specifications.
3. Measure the height of each lobe
(Figure 6-78, (1))
. Record the measurements.
See Camshaft on page 6-6 for specifications.
Figure 6-78
4. Measure the diameter of the gear end
(Figure 6-79, (1))
, intermediate
(Figure 6-79, (2)),
and flywheel end
(Figure 6-79, (3))
bearing journals. Record the
measurements.
specifications.
Figure 6-79
Item
Finishing Precision
Connecting Rod Journal
Undersize Finished Size
1.6418 - 1.6422 in.
(41.702 - 41.712 mm)
Main Bearing Journal
Undersize Finished Size
1.8387 - 1.8391 in.
(46.702 - 46.712 mm)
Journal Radius (R)
0.138 - 0.150 in.
(3.5 - 3.8 mm)
Journal Face Finish (Ry)
0.8S (Super Polish)
Thrust Face Finish (1)
1.6
Ry
Ry
R
R
(1)
R
00002
3
4A
0002196
(1)
0001712A
0001713A
(3)
(2)
(1)
TNV_IDI_ServiceManual_A4.book 50 ページ ２０１２年２月２４日 金曜日 午前１０時２４分
