Yanmar 2TNV70, Service Manual

Page: 233 / 264

ALTERNATOR
TNV IDI Service Manual 11-19
Dynamo
Disassembly of Dynamo
1. Remove the rear cover (Figure 11-24, (1)) .
2. Remove the nut (Figure 11-23, (2)) , lock
washer (Figure 11-24, (3)) , and flat washer
(Figure 11-24, (4)) .
Figure 11-24
3. Remove the through bolt (Figure 11-25, (1)) ,
pulley half (Figure 11-25, (2)) , flywheel
(Figure 11-25, (3)) , flat washer
(Figure 11-25, (4)) , bearings
(Figure 11-25, (5)) , and spacer
(Figure 11-25, (6)) .
Figure 11-25
4. Remove the screws (Figure 11-26, (1)) and the
stator assembly (Figure 11-26, (2)) .
5. Remove the rear bearing (Figure 11-26, (3)) .
Figure 11-26
Reassembly of Dynamo
1. Reinstall the rear bearing (Figure 11-26, (3)) .
2. Reinstall the stator (Figure 11-26, (1)) .
3. Reinstall screws (Figure 11-26, (1)) .
4. Reinstall the front bearings (Figure 11-27, (5))
and spacer (Figure 11-27, (6)) .
5. Reinstall the flat washer (Figure 11-27, (4)) ,
flywheel (Figure 11-27, (3)) , pulley half
(Figure 11-27, (2) , and through bolt
(Figure 11-27, (1)) .
Figure 11-27
(1)
(2)
(3)
(4)
000214 3
(6)
(5)
(4)
(3)
(2)
(1)
0002144
(3)
(2)
(1)
0002145
(6)
(5)
(4)
(3)
(2)
(1)
0002144
TNV_IDI_ServiceManual_A4.book 19 ページ ２０１２年２月２４日 金曜日 午前１０時２４分