15
4. Operating procedures
Preparations
（
GAS410
）
（
3
）
Connect between GB210A and GAS410.
A: Use the hose to connect the heater inlet with filter outlet, and then connect the filter inlet with
GAS410.
Put an O-ring and securely fix using a clamp for installation.
B: Connect the flexible duct into the connecting tube to the duct connecting (inlet) port of GAS410.
Put an O-ring and securely fix using a clamp for installation.
C: Connect a Fluororubber tube (milky white) and fix it using a wire clamp.
D: Connect a tetrone braided hose and fix it using a wire clamp.
E: Connect a tetrone braided hose to the N
2
gas supply unit and fix it using a wire clamp.
F: Connect an interface cable.
G: Connect an interface cable.
H: Set GF300 to the main unit according to the operation manual of GB210A. Note, however, the
outlet of the cyclone for the connecting hose.
（
Connect to the connecting tube.
）
F
G
C
D
A
B
E
H
Exhaust hose is
connected here.
Not used
