30
4. Operating Procedures
Creating a program
MEASURED TEMP.
℃
HEATER
ENTER
SET
TEMP.
OVER TEMP .
RUN
STOP
SUB
MENU
TIMER
FIXED
TEMP.
PROGRAM
PROTECTOR
ALARM
AUTO STOP
AUTO START
FIXED TEMP.
PROGRAM
6.Ending the Program operation
When the Program operation has ended, the buzzer will sound for
about five seconds.
The set temperature indicator displays the character
“End” that
means the completion of operation.
Press
RUN/STOP
key to return to the Initial setting screen.
About the timer function
Maximum settable time for the timer is 999 hours 50 minutes.
Time can be set in the unit of minutes up to 99 hours 59 minutes.
Time period 100 hours and longer shall be set in the unit of 10
minutes.
You can continuously change set time and change to the setting you
want quickly by keeping
▽
and
△
keys pressed. Press
▽
and
△
keys once at a time to fine adjust a time.
If you want to correct
wrong settings or to
check settings
If you want to return to the previous step, for example, to correct a
wrong program or to check settings again, press
FIXED TEMP.
key
to return the Setting screen to the previous one.
Each time you press
FIXED TEMP.
key, you will go back by one step.
Note
：
Be sure to perform this operation in the Program Setting
screen.
About
wait
action
during the Program
operation
When a program moves from one step to the next, the next step will
not start if measured temperature has not reached the set
temperature or has exceeded it when the step set time has elapsed.
Note that the unit has been set so that steps will move to the next in
the range of
±
3
℃
to the set temperature.
Summary of Contents for DKG610
Page 2: ......
