25
4. Operating Procedures
Operational steps
(
Auto Start operation
)
MEASURED TEMP.
℃
HEATER
ENTER
SET
TEMP.
OVER TEMP .
RUN
STOP
SUB
MENU
TIMER
FIXED
TEMP.
PROGRAM
PROTECTOR
ALARM
AUTO STOP
AUTO START
FIXED TEMP.
PROGRAM
3.Stopping and ending the Timer operation
Operation starts automatically when the set time comes.
Press
RUN/STOP
key for about one second to stop or end
operation. The screen changes to the initial setting screen.
When you want to
correct
a
set
temperature or a set
time or check settings
When you want to change the set temperature or the set time during
operation, press
TIMER
key without stopping operation, set the
temperature and the time for the Auto Start operation using
▽
and
△
keys and then press ENTER key for each setting.
た
But when you change the set time, you need to set a time
calculated by adding time period to add to the time already passed.
However, you need to set a time calculated by adding time period to
add to the time already passed when you change the set time.
Pressing
▽
key during operation will display the set temperature, the
operation mode, and the remaining time on the set temperature
indicator.
Once the Auto Start time is passed and operation has started, you
cannot change the setting. In this case, use
RUN/STOP
key to stop
operation and make settings again.
Summary of Contents for DKG610
Page 2: ......