4
CAUTION
Press the controller against the mounting bracket to make sure that the bracket claws enter the
grooves of the controller.
Tighten the top and bottom screws. (When the screws touch the panel, turn the screws another half
turn.)
●
C10T
●
Required tools
Phillips screwdriver
Insert the controller into the
opening on the front side of the
panel.
Attach the mounting bracket at
the rear side of the panel.
■
Mounting Procedure
Use the SDC10 within the operating ranges recommended in the specifica-
tions (temperature, humidity, voltage, shock, mounting direction, atmo-
sphere, etc.). Failure to do so might cause fire or faulty operation.
Do not block ventilation holes. Doing so might cause fire or faulty operation.
Be sure to attach the terminal cover (sold separately) after wiring the SDC10.
Failure to do so might cause electric shock, fire or faulty operation.
Handling Precautions
When three or more units are gang-mounted horizontally, the maximum allowable ambient
temperature is 45
°
C.
Panel
Mounting
Bracket
Socket
Handling Precautions
●
Do not operate the keys with a propelling pencil or sharp tipped object. Be sure to mount this
controller on a panel. Cover terminals to prevent electric shock.
An optional terminal cover is provided. (model No.: 81446464-001)
●
Do not overtighten the screws to prevent deformation of the front panel.
●
C10S
Mount the socket in the panel
using a DIN rail or screws.
Wire the socket.
Insert the body of the control-
ler into the socket.
Insert the clasps at the top and
bottom of the socket into the
holes of the controller body to
firmly secure it to the socket.
Chapter 3 MOUNTING
1
2
3
4
1
2
3
4
