1
Hold this key down for at least 1
second to enable either of the
following operations.
•
•
•
•
Factory setting is key lock state.
Run (RUN)/ (READY)
Cancelation of event latch state
Auto-tuning start/stop
SP No. switching
key
EV1:
EV2:
OT:
SP1:
RDY:
Lights when event 1 is ON.
Lights when event 2 is ON.
Lights when the control output is ON.
Lights (or, blinks) when No.1 to No.3
SP is switched.
Lights when READY (control stop)
Mode LEDs
Displays PV values (current
temperature, etc.) or setup items
This LED blinks in the self-tuning mode.
Displays SP values (set
temperature, etc.) and other
parameter values.
This LED blinks in the auto-tuning mode.
Upper display
Lower display
keys:
Switches the display. Hold
down for at least 3 seconds
to switch modes.
key
PARA
RDY
Used for incrementing numeric
values and performing arithmetic
shift operations.
Unpacking
When unpacking the product, check that you have received all the items that you ordered.
The C10S type socket is optional.
After unpacking, handle the SDC10 and its accessories taking care to prevent damage or loss of parts.
Those using the communications function, should read the DIGITRONIK digital indicating controller
User's Manual SDC10 “Communications Function Manual”.
If an inconsistency is found or the package contents are not in order, immediately contact your dealer.
Conventions Used in This Manual
The following conventions are used in this manual.
Handling Precautions
: Handling Precautions indicate items that the user should pay attention to when
handling the SDC10.
Note
:
Notes indicate useful information that the user might benefit by knowing.
Name
Catalog No.
Q’ty
Remarks
Body
1
Installation tool
81446403-001
1
(C10T type only)
User’s Manual
CP-UM-1703E
1
Engineering Unit seal
1
See
■
Model Selection
Guide on page 2.
This manual
Chapter 1
NAMES & FUNCTIONS OF PARTS
