11
5-2
Setup Items
This section describes how to set the controller to the Operation mode after it is first
mounted in instruments. Before this controller is first used, the input range, event opera-
tion type and other operating conditions matched to the desired instrument application
must be set. This is referred to as “setup.”
If this controller is already mounted in instruments and the setup is already completed,
proceed to the next chapter.
The following shows the initial settings in basic controller operation:
Handling Precautions
The alarm code and blinking to indicate self-tuning or auto-tuning in progress are
not displayed while moving to the setup mode.
C
0
1
RDY
PV
SP
1
0
S
d
C
RDY
PV
SP
S
d
C
RDY
PV
SP
1
0
2
0
RDY
PV
SP
1
0
2
0
RDY
PV
SP
0
C
t
R
L
RDY
PV
SP
0
C
0
4
C
0
4
RDY
PV
SP
3
RDY
PV
SP
5
Entering the setup mode
Procedure
Operation mode
Parameter mode
Setup mode
Operation mode
Power ON
The initial screen is displayed
for about 6 seconds.
The operation mode is
displayed.
Hold down the key for
3 seconds to advance to the
parameter mode.
The setup mode is displayed.
PARA
PARA
Hold down the key for
3 seconds to advance to the
setup mode.
PARA
Press the key to scroll
the selection.
PARA
Hold down the key for
3 seconds or wait 1 minute.
Press the , and
keys to set the numeric value.
To return to the operation mode
Example:
Current PV value
Current SP value
C
0
4
(input range)
Current PV value
(in the operation mode)
Change the input range from
"K 0 to 400
°
C" to "J 0 to 800
°
C".
Item setting value
(default
3
: K 0 to 400
°
C)
Change to
5
. The value blinks for
2 seconds before it is fixed.
(
5
: J 0 to 800
°
C)
Current SP value
1
2
3
4
5
6
7
Chapter 5 INITIAL SETTINGS
