Yamaha YZ 2015 Series, Owner'S Service Manual

Page: 210 / 396

ENGINE REMOVAL
5-7
EASB291206
REMOVING THE ENGINE
1. Remove:
• Pivot shaft “1”
TIP
If the pivot shaft is pulled all the way out, the
swingarm will come loose. If possible, insert a
shaft of similar diameter into the other side of
the swingarm to support it.
2. Remove:
• Engine “1”
From the right side.
TIP
• Make sure that the couplers, the hoses, and
the cables are disconnected.
• Lift up the engine, and remove this from its
lower part toward the right of the chassis.
EASB291207
CHECKING THE SILENCER AND EXHAUST
PIPE
1. Check:
• Gasket “1”
Damage

Replace.
EASB291208
CHANGING THE SILENCER FIBER
1. Remove:
• Bolt “1”
• Silencer body “2”
ECA
NOTICE
Do not hit the silencer stay “a” as it may do
damage to the silencer.
TIP
Remove the inner pipe while holding the silenc-
er in place with a vise etc.
1
1
1
a
1
2