7 - 34
DRIV
REAR CONSTANT VELOCITY JOINTS, FINAL DRIVE
GEAR AND DRIVE SHAFT
6) Round off the hundredth digit and select the
appropriate shim(s).
In the example above, the calculated num-
ber is 0.97. The chart instructs you to round
off 7 to 5 at the hundredth place. Thus, the
shim thickness is 0.95 mm.
Shims are supplied in the following thick-
nesses.
▲▲▲
▲
▲ ▲▲▲
▲
▲ ▲▲▲
▲
▲ ▲▲▲
▲
▲ ▲▲▲
▲
▲ ▲▲▲
▲
▲▲▲
Hundredths
Rounded value
0, 1, 2
0
3, 4, 5, 6, 7
5
8, 9
10
Final drive pinion gear shim
Thickness (mm)
0.25
0.30
0.35
0.40
0.45
0.50
Selecting ring gear shims
1. Select:
• ring gear shim(s)
1
▼▼▼
▼
▼ ▼▼▼
▼
▼ ▼▼▼
▼
▼ ▼▼▼
▼
▼ ▼▼▼
▼
▼ ▼▼▼
▼
▼▼▼
a. To find the ring gear shim thickness “B”, use
the following formula.
e
= a numeral (usually a decimal number) on
the final gear case either added to or sub-
tracted from “50”.
f
= a numeral (usually a decimal number) on
the outside of the ring gear bearing hous-
ing and added to 1.
g
= a numeral (usually a decimal number) on
the inside of the ring gear either added to
or subtracted from 35.00.
Ring gear shim thickness
“B” =
e
–
f
– (
g
+
h
)
f
h
e
g
“B”
1