7 - 15
DRIV
FRONT CONSTANT VELOCITY JOINTS, DIFFERENTIAL
GEAR AND DRIVE SHAFT
b. Install the dust boots
1
.
c. Install the dust boot bands
4
,
5
.
Use a boot band installing tool
6
.
TIP:
_
• The new boot bands may differ from the orig-
inal ones.
• The dust boots should be fastened with the
boot bands
3
and
5
at the grooves in the
joint shaft.
▲▲▲
▲
▲ ▲▲▲
▲
▲ ▲▲▲
▲
▲ ▲▲▲
▲
▲ ▲▲▲
▲
▲ ▲▲▲
▲
▲▲▲
Boot band installing tool
90890-01526, YM-01526
6
4
È
5. Check:
• thrust movement free play
Excessive play
→
Replace the joint assem-
bly.
EBS01009
ASSEMBLING THE DIFFERENTIAL GEARS
1. Measure:
• gear lash
Refer to “MEASURING THE DIFFEREN-
TIAL GEAR LASH”.
2. Install:
• differential gear motor
▼▼▼
▼
▼ ▼▼▼
▼
▼ ▼▼▼
▼
▼ ▼▼▼
▼
▼ ▼▼▼
▼
▼ ▼▼▼
▼
▼▼▼
a. Slide the shift fork sliding gear
1
, which is
installed to the differential gear, to the left to
put it into the 2WD mode.
1